Page 1 of 1

Linux Dedi

Posted: Fri Dec 18, 2009 12:11 pm
by YrDaDy
Was thinking about setting up a dedi server for D3. My server runs CentOS with only the server shell. (I do everything through SSH)

Does anyone know how or if it's really possible to setup a stable / fast dedi with D3 on this setup?

If so, please enlight. :D

Posted: Fri Dec 18, 2009 1:21 pm
by Xamindar
I don't think the linux dedicated server (was there even one?) even worked correctly. There must be a reason I set up a win 2000 box for my D3 dedicated server, think the linux one was very buggy.

Posted: Fri Dec 18, 2009 1:27 pm
by D.Cent
Sure that works.

You must only run servers which use a correct checksum (such as Stadium, Halcyon, ...).

Test it out here: d3://85.25.136.157:2098

EDIT: When 1.5 comes out, there won't be any disadvantages.

Re:

Posted: Sat Dec 19, 2009 11:23 pm
by YrDaDy
D.Cent wrote:Sure that works.

You must only run servers which use a correct checksum (such as Stadium, Halcyon, ...).

Test it out here: d3://85.25.136.157:2098

EDIT: When 1.5 comes out, there won't be any disadvantages.
Care to elaborate on how to go about setting one up?

Posted: Sun Dec 20, 2009 8:14 am
by D.Cent
Depends on what system the server is running (e.g. SuSE 10.2 or Debian Lenny or ...) - so please tell me.

The point is, that the original Outrage Linux server isn't working on newer systems (always gets a reliable buffer overrun).

Here's how you can check it:

1.) Download http://descent3.com/files/linux/descent ... 386.tar.gz to your server and unpack it
2.) Go into the descent3-directory and put the d3.hog in there
3.) Edit the Dedicated.cfg (don't forget to upload the mission)
4.) Run the server with ./descent3 -dedicated Dedicated.cfg -useport 2098
5.) Try connecting to the server from your local machine, using serverip:2098. If you can't connect because the client hangs on \"Receiving data\", then you need a workaround (using Loki's executables) which I will post later since this is a bit more complicated.

Re:

Posted: Mon Dec 21, 2009 7:57 pm
by YrDaDy
D.Cent wrote:Depends on what system the server is running (e.g. SuSE 10.2 or Debian Lenny or ...) - so please tell me.

The point is, that the original Outrage Linux server isn't working on newer systems (always gets a reliable buffer overrun).

Here's how you can check it:

1.) Download http://descent3.com/files/linux/descent ... 386.tar.gz to your server and unpack it
2.) Go into the descent3-directory and put the d3.hog in there
3.) Edit the Dedicated.cfg (don't forget to upload the mission)
4.) Run the server with ./descent3 -dedicated Dedicated.cfg -useport 2098
5.) Try connecting to the server from your local machine, using serverip:2098. If you can't connect because the client hangs on "Receiving data", then you need a workaround (using Loki's executables) which I will post later since this is a bit more complicated.
Thanks for the info. The server is running on CentOS (stated that in my first post).

I'll give this stuff a try soon and see how it goes. :D