DescentBB

Posted: **Tue Jun 14, 2005 5:32 am**

D2X-W32 1.4.29

Fixed: Camera views showed the cockpit when cockpit view or status bar were enabled.
Fixed: Wide screen view borders overdrawn by camera views.
Improved: Made a few menu hotkeys unique in their resp. menus.
Fixed: Explosions shining through walls (explosions are depth tested again, maybe making them not look as nice as they could on certain occasions, but hiding them if they appear at the rear side of walls or doors).
Fixed: Parts of some powerups were rendered transparently.
Changed: "Render HUD" option now only affects the full screen view.

Posted: **Sat Jun 18, 2005 2:39 pm**

D2X-W32 1.4.30

Improved: Speed boost area movement direction calculation. The ship will now move parallel to a vector ("line") from the center of the side containing the speed boost trigger to the center of the speed boost trigger's target side.
Changed: You can now call the options menu or pause/exit the game when in speed boost mode.
New: If the ship gets stuck at a wall while in speed boost mode, it won't freeze any more, but drop into regular flight mode.

Posted: **Tue Jun 21, 2005 1:59 pm**

D2X-W32 1.4.31

Improved: Framerate with several visible camera views.
Fixed: Speed boost where the speed boost trigger target is the opposite side of the trigger (i.e. a speed boost "reflecting" the ship).

Posted: **Wed Jun 22, 2005 2:41 pm**

D2X-W32 1.4.32

Fixed: One or two laser bolts invisible at certain view angles when firing quad lasers.
Fixed: (Some) bots (e.g. Smelter) wiggling and changing shape like they'd start to morph.

Posted: **Wed Jun 22, 2005 6:57 pm**

D2X-W32 1.4.33

Fixed: Lightmap performance issue on some Radeon cards.
Improved: Lightmap calculation much faster now.

Posted: **Thu Jun 23, 2005 4:42 am**

D2X-W32 1.4.34

D2X-W32 will now understand the name tag "d2x-name" of D2X-W32 missions that has been introduced with DLE-XP v1.4.15. This should take care of non-D2X-W32 program versions loading D2X-W32 levels and crashing when trying to display them.

Posted: **Thu Jun 23, 2005 4:29 pm**

D2X-W32 1.4.35: High res, true color replacement textures

New: Support for high-res, true color replacement textures. A replacement texture must have TGA format (uncompressed, 24 bits w/o alpha channel or 32 bits w/ 8 bit alpha channel) and must be stored in a subfolder of the Descent 2 folder named "textures" with the same name as the texture it replaces (e.g. "c:\programs\descent 2\textures\metl130.tga").
Fixed: Powerups were rendered slightly transparent.
Fixed: Missile and gun fire explosions weren't rendered transparent if the transparent explosion option was checked.

Posted: **Sun Jun 26, 2005 2:42 pm**

D2X-W32 1.4.36

Fixed: Midi music sometimes not looping properly.
Fixed: Midi music looping during endlevel sequence when it should not.

Thanks to Rob for providing these bug fixes.

Posted: **Thu Jun 30, 2005 3:20 pm**

D2X-W32 1.4.37

New: Support for partially transparent high-res overlay textures (like door animation frames, grates or fans). This feature requires use of a shader program. In case the hardware doesn't support shader programs, high-res texture use will be inhibited.
New: New option "use high-res textures" in the render options menu (will not be displayed if the hardware doesn't support the required shader program).

Posted: **Fri Jul 01, 2005 6:55 am**

D2X-W32 1.4.38

Fixed: Level version mismatch when playing with pre 1.4.3x D2X-W32 or legacy D2 versions (reason: calculation result deviations due to using faster and more precise math routines ...).
Fixed: Animations not working.
Improved: Transparency checking for TGA image based textures.

Posted: **Fri Jul 01, 2005 2:37 pm**

D2X-W32 1.4.39

Fixed: CTD when switching to Cockpit or bar HUD views.

Posted: **Fri Jul 01, 2005 5:40 pm**

D2X-W32 1.4.40

Fixed: Sides with a second texture on them too bright with multi texturing.
Fixed: Buggy TGA file handling.

Note: If you downloaded v1.4.40 before reading this, download it again.

Posted: **Sat Jul 02, 2005 2:59 pm**

D2X-W32 1.4.41

Fixed: Most parts of levels pitch black with lightmapping enabled.^
Fixed: Object texture animation not working.
Fixed: Massive performance loss with lightmapping enabled.

Posted: **Sat Jul 02, 2005 6:55 pm**

D2X-W32 1.4.42

Fixed: Shots didn't pass through grates etc.
Fixed: Overlay texture transparency work for all D2 palettes now (I hope ).

Posted: **Sun Jul 03, 2005 4:11 pm**

D2X-W32 1.4.43

Fixed: Doors, fans, grates etc. that have base textures (forming a frame for them) aren't rendered transparent if the hardware doesn't support the required shader program.
Changed: Removed option "use high-res textures" from render options menu and added switch "-hires_textures" to d2x.ini instead. That means use of high res textures will be determined once at program start and cannot be changed while the program is running. High res textures aren't supported if the hardware doesn't support the required shader program.
Changed: No multitexturing if use of high res textures is disabled.

Posted: **Mon Jul 04, 2005 4:54 am**

D2X-W32 1.4.44

Fixed: Couldn't move to top of menu using the keyboard in config control menu.
Improved: You can now cycle through a menu using the keyboard w/o stopping at the first or last option, and the menu will wrap around properly even for scrolling menus.

Posted: **Tue Jul 05, 2005 7:33 am**

D2X-W32 1.4.45

Fixed: TGA textures from pog files containing transparency were handled like completely opaque textures, leading to visible faces behind them not being rendered.

Posted: **Tue Jul 05, 2005 10:15 am**

D2X-W32 1.4.46

Fixed: Textures sometimes not animated when having custom TGA animations.

Posted: **Wed Jul 06, 2005 6:38 am**

D2X-W32 1.4.47

Improved: Camera performance. Using cameras will result in a much smaller framerate hit than it used to do now.

(Before this fix I had framerates drop below 10 fps w/ Athlon 64 3500+ s939 + GF FX 5200 @ 640x480 even if the cameras had a refresh rate of only 5 times per second. Now I am having 30 fps with full speed camera refresh, two monitors in sight, and transparent textures around. The frame rate gets about halved by the cameras (well, D2X-W32 has to make a full rendering pass for each visible monitor's camera), but still stays within acceptable bounds even with my low end gfx card.)

Posted: **Thu Jul 07, 2005 5:23 pm**

D2X-W32 1.4.48

New: Support for expanded wall transparency (i.e. every wall can now be more or less transparent).

Posted: **Tue Jul 19, 2005 6:27 am**

D2X-W32 1.4.49

Fixed: Maneuvering in speed boost areas didn't work properly.
Changed: Max. render depth significantly increased.

Posted: **Wed Jul 20, 2005 5:50 am**

D2X-W32 1.4.50

Fixed: Bots behind doors or walls that notice and react to the player when they shouldn't.

Posted: **Tue Jul 26, 2005 6:18 am**

D2X-W32 1.4.51

Fixed: Distorted door back sides.
New: Added a few notebook/wide screen resolutions.

Posted: **Wed Aug 03, 2005 1:21 pm**

D2X-W32 1.4.52

Fixed: Couldn't shoot through shoot-through areas of high-res textures.

Posted: **Tue Aug 30, 2005 7:08 am**

D2X-W32 1.4.53

Fixed: Secondary views not available with status bar hud.

Posted: **Fri Sep 02, 2005 6:03 am**

D2X-W32 1.4.54

Fixed: Graphical weapon display didn't work any more.

Posted: **Tue Sep 13, 2005 6:33 am**

D2X-W32 1.4.55

Improved: Joystick deadzone slider control granularity.

D2X-W32 1.4.56

Version skipped.

Posted: **Tue Sep 20, 2005 9:49 am**

D2X-W32 1.4.57

Improved: D2X-W32 will now use the original weapon power data from the Descent 1 data files for Descent 1 levels.
Fixed: Crash when loading certain D1 levels with custom music or some music related problem.

Posted: **Thu Sep 22, 2005 8:10 am**

D2X-W32 1.4.58

Fixed: Weapons doing no damage when playing a Descent 1 level and not having the Descent 1 data files present in the Descent 2 main folder.

Posted: **Mon Sep 26, 2005 4:42 am**

D2X-W32 1.4.59

Fixed: For certain textures, their transparent areas were rendered pink when using high res textures.
Fixed: Screenshot function should finally work reliably.

Posted: **Wed Sep 28, 2005 1:06 pm**

D2X-W32 1.4.60

Fixed: Backsides of blastable doors could become impenetrable after having been blown up.

Posted: **Tue Oct 04, 2005 3:46 am**

D2X-W32 1.4.61

New: Support for custom palettes. These must be stored in a mission's hog file and bear the related level's name plus the extension '.pal'. Hence, you can have a custom palette per level.

For the palette format, the the DLE-XP update notification thread.

Posted: **Wed Oct 05, 2005 6:11 am**

D2X-W32 1.4.62

Fixed: D2X-W32 levels using the zname tag in the mission file not loading when no custom robot file (.hxm) was present for the level.
Fixed: Levels whos names contained whitespace characters (e.g. blanks) weren't loaded.

Posted: **Thu Oct 06, 2005 5:43 am**

D2X-W32 1.4.63

Fixed: Automap showing too much of a level.
New: Switch "Multiple Bosses" in the gameplay options menu. If checked, you will have to kill all bosses in a level to end the level, not just one.

This should be interesting for level designers, because they can now put several bosses into a level and have them all show the full boss behaviour (set the "end level" flag for each boss in DLE-XP).

Note: You can still not have both a boss and a reactor in a level. You can however have mini reactors that will not end the level.

Posted: **Fri Oct 07, 2005 9:34 am**

D2X-W32 1.4.64

Fixed: Crash when missions folder contained 300 or more missions.
New: Option to chose whether only to play D1, D2 or both versions' missions.

Posted: **Tue Oct 11, 2005 3:13 am**

D2X-W32 1.4.65

Fixed: Joystick deadzone granularity slider not working properly.

Posted: **Tue Oct 11, 2005 6:02 am**

D2X-W32 1.4.66

Fixed: Friendly fire option working the wrong way round.
Improved: Memory consumption.

Posted: **Thu Oct 13, 2005 11:15 am**

D2X-W32 1.4.67

New: When multiple bosses is enabled (gameplay options menu), there can also be a reactor in the level.
New: D2X-W32 now supports using a singleplayer missions folder. It must be a subfolder of the missions folder and bear the name 'single' (e.g. c:\program files\descent2\missions\single'). The main menu has a new option "New single player game", displaying only missions from that folder in the mission list.
Improved: When building the mission list, D2X-W32 now doesn't simply read all mission files (*.msn, *.mn2), but checks if the related level files (*.hog) are present, and if not, doesn't display the mission in the mission list. That way, you will get around errors when trying to play such a mission.

Posted: **Thu Oct 13, 2005 5:01 pm**

D2X-W32 1.4.68

New: Support for Descent 1 shield damage and energy drain triggers.

How do D1 triggers of type 'one shot' work?

Posted: **Fri Oct 14, 2005 9:37 am**

They fire off once, triggering something like a matcen only one time (3 robots). A normal trigger fires a matcen off every time you go through the triggering cube...quickly filling a room with bots.

DescentBB

D2X-XL Update Notification Thread

D2X-W32 1.4.29

D2X-W32 1.4.30

D2X-W32 1.4.33

D2X-W32 1.4.34

D2X-W32 1.4.35

D2X-W32 1.4.37

D2X-W32 1.4.38

D2X-W32 1.4.39

D2X-W32 1.4.40

D2X-W32 1.4.41